Onda Clone not starting
 

hello everybody,

I have a onda clone 8GB with Camera with chip Rockchip2608 and memory Hynix to repair

the fault is that the MP4 starts , i get startup screen " Mini Player MP4" and after that nothing , no reaction. Also impossible to shutdown the MP4 , only by pushing Reset Button.

When it's connected to PC , i can access to memory ( it's show as removal disk ) but when i disconnect , the screen with computer design stays on and also , no possible to shutdown.

It come from a gril who has 12 years old and knows nothing on firmware upgrade and Pc so i assume that any upgrade has been done.

What can i do ??? It's no more in warranty.

In advance , thanks for your help

Need more info?

I can provide all the infos you need !

Wich infos you need ?

Thanks for your help

Send a picture.
 

Find a similar player on eBay (search mp4 theres thousands) and post a link.

These are 2 pictures of the player and here is the list of all the chips present inside :

Rockchip RK2608A
Elpida S6416AHTA-68-E
Hunyx HY27UV08BG5A 2 chips present
ITH-EKVISION W3020SNK-G


Hebergement gratuit d'images, heberger vos photos pour forum, msn et site sur casimages

Hebergement gratuit d'images, heberger vos photos pour forum, msn et site sur casimages


Please help me ! Thanks a lot !!

I have some news...

I tried to upgrade firmware with some found in the forum and i was able to have a menu but as other people , touchscreen is not working.....

so i dismounted the main board and i found that i need firmware for board : HTC-039C-RK-V3 2008-03-10

If someone hs a link for that firmware ...

Thanks

upppppppppppppppp

uppppppppppppp:(