[Tut] hwo to remove memory-hack on Rockchip Mp4-players.
 

I just found out, how to remove the memory-hack on my rockchip (fake-)32-gb-touchscreen-player.

i used hw2test to find out, that 1,7 GB are writeable, so the real size should be 2 gb.

I once played around with formatting and low-level-formats at my old xp-pc. and when i plugged my device back on my windows.7 pc, it showed 1.7gb (the real size). I didn't know how it worked at first and re-formatted, so it came back to 32gb.

Now i did some experiments at windows 7 and they worked:
This is, how to check the real size of the player! : (use with caution)
i formatted the player to NTFS with larged available cluster-size (it was 64kb) and after that i disconnected the player from the pc, did a reset and viola! in windows and on the player itself, it revealed the real size. (and went automatically back to FAT32 and created all folders itself.

So in short:
Make hw2test to find out real size. (may not be needed)
Format to NTFS using 64k cluster-size)
Disconnect and reset.

Hi Satani,

I also have a faked 32GB Touch screen MP4 similar to the attached picture below.
I would like to give it a try to remove the faked memory capacity back to real 4 GB (I guess).

I would like to check with you first before trying.
Did you completed the ntfs formatting under Windows 7? I don't have the Windows 7. Will Xp pro does the job?
How much real memory capacity do you have after this reset?
Did you check the flash memory part# to confirm? If you have 2GB it seems low?
Because my player have a built in 4GB flash chip.
Do you need to reload all the system files back to the player after resetting the memory?

Thanks in advance!

i did it on win xp and win7. just format to ntfs, then the internal secure will reveal the raal size