Problema con reproductor rockchip rk27xx
 

If you go to this post, and follow the instructions at the end of the 1st post it will work
http://mympx.org/forum/support-how/4...plays-you.html

You will need checkflash 1.10 available here
Download Check Flash, Check Flash 1.10 Download


I had to set mine for about 1.75G and it worked fine. Mine was sold as a 8GB buy ebay seller nan_store and I have requested a 50% refund on each unit(I bought 2). I will see what I get.

First sorry if my English is not very good, but I'm Spanish.

The problem I have with the player is said to have 16 GB and not true, as supported memory card I have introduced a 2GB and says it has 16GB.

Use H2testw and put that memory was 1.4 GB and that he had damaged disk sectors, by ChkFlsh 1.10 changed the 16GB size to 1.4 GB, then put music and videos and when he got to play me formatting error, delete all files and got only one and if it worked, I understand that happens to the player.

Another problem is that I put a song, I turn it off and when I turn on the player I get the blue screen calibration, ie it restarts.

The chip is a rk2705 Rockchip, hardware type RK27xx, Version prin.No. Manufacturer 1.1, and the memory chip is a Hynix: h27uag8t2mtr bc the brand of player is rizone, I put the eBay site that you may know as the player.

16GB 3.0 TouchScreen MP3 MP4 MP5 RM Player SD USB MG16 en venta en eBay.es (finaliza el 14-ene-10 19:16:14 H.Esp) # ht_2725wt_1165

Thanks for the info friend!

If I understand what you are writing, you have used the Chkflsh program to resize the memory. After using Chkflsh you must go into windows and do a format Fat32 on the drive. This is required after you change the size. You can then load your music files. This worked on both of my players

I can not get me work, I put something after formatting it and when I go to play something, but then he starts invalid format and no longer works, I turn it off and on again and I get to calibrate the screen and I change the wallpaper and language

Also reinstall the firmware, but again I get off of here does not fit in the partition as it is only 30Mb and 40Mb I need to put in the new.

Can tell me because when I insert a 2GB card it says there is 16GB? He did not let me format the memory card and this works because I have a mobile phone.

thanks for everything

sorry, I have not tried to use a memory card on my units so I am not sure how they work.

Dave

Ok, Thank you for all your information, I hope someone can help me, if they cease to paperweights, so good that I told the dealer that I have not received the article, it came as no certificate or number of shipping with , Then the seller had to make a full refund:)