Problems with 4th Gen iPad Nano Clone

[jevaba]

Bought this on ebay. I had trouble getting Windows to recognize the device, and found all this information on memory hacks, etc. Finally figured out it was the USB connector having problems (had to hold the cable just right to make a good connection). Long story short, once I got it connected I tried removing the memory hack (mine said it had 8GB), using the sticky post in this forum. The player seems to actually have 8GB like it says. However after using the MP3 Player Disk Manager tool and format the drive in Windows, I get "Disk Error" when I try to view a file on the player. I can see the drive just fine in Windows, and copy files to and from it, just can't figure out why I'm getting the error on the player.

This is a 4th Gen iPad Nano look-a-like (like the ones picture here: http://mympx.org/plugins/p17_image_g.../images/20.jpg)

Firmware Version says:

2008/09/05
9.5.54
2009/12/01
hxt_asdks15

Haven't cracked it open to look at any of the chips yet. Any suggestions?

[japanfreak]

Ok if the mp4 is saying "Disk Error" after everything you try to access on the player then you need to format it again but it's gonna take some time. You'll need to format it twice with two different formators. I had to download the HDD Low format tool. You can get it here: HDDGURU: HDD Low Level Format Tool

You have to download this and do a low format with this first. It might take a while usually it seems to take about 30 minutes for me. After that format is done go into the formator it gave you and format it on full format. After that it should work.

Hope this helps.