Replacement display MP4

[iwanwas]

This is the firmware of the player with a broken display

[iwanwas]

And this is the firmware of the player - donor.
Firmware is downloaded from the Internet - it is not from the player.

[lolita]

LX2114: Very strange connectivity (RST=A2,A0=C2,BKL=A0), equally strange LCM controller (Samsung-inspired commands?) -- 128x160
ZX-6012M: Common connectivity (shared with at least 5 other models), 132x132 (active area 128x128), standard Epson-compatible controller

My recommendation is to use the ZX-6012M instead, since you can easily find firmware for it and the hardware is well known.

[iwanwas]

If I understood correctly, recommend changes to the original firmware to another, to meet the new display. If so, can you recommend me a suitable firmware.
Hardware is -
CPU AK1025
Flash Hunix-1GB
with FM TEA5767
Loudspeaker-Yes
Thanks very much!

[iwanwas]

To lolita:
I found the necessary drivers and they changed in the original firmware. Now the display began to show but "incorrect".
http://img191.imageshack.us/img191/2589/dsc0160712.jpg


Then I changed UI30.RES files from the firmware to 1.5 inches and the player started to show even better, like 1.5 inches, but lost the main menu.

I think the problem is as follows:
Original display of the player was 160/128 pixels
http://img824.imageshack.us/img824/6517/foto201.jpg



The new drivers are for 128/160 pixels

If I change something in the drivers - the display from 128/160 to 160/128 pixels I think it will be OK

Originally Posted by lolita

LX2114: Very strange connectivity (RST=A2,A0=C2,BKL=A0), equally strange LCM controller (Samsung-inspired commands?) -- 128x160

Please tell me what to change in the drivers to make the drivers for 160/128 pixels