Replacement display MP4
 

Hi, I have MP4 player with a broken display. Can I be replaced by another screen, other than the original? Other displays to work I need to change something in the firmware and what? Thanks!
Sorry about my English :oops:


PS I have the original firmware, if anyone can make changes as needed

Part number?

Broken display
NO128160CNFG1 FP-1
-XL-2006.11

Works display
JCT006A
07.06. 10
Can you help me? :(

Do they have the same pinout? I'm not familiar with those parts.

I think that the same pinout, but maybe need to change something in the firmware. And I do not know what and how to change...

The display driver.

They may have the same controller, in which case no change is required.

I swapped the displays and new display shows nothing, just working lights.
I think something should change in the software.
These drivers where to look - in a firmware?
I do not have much experience, so I need more information, explanations and assistance.
Thanks!

What model of player?

The Player is "neo m'sport MP-01F"-Mainboard LX-2114-V1-97
The display is from "IOcean"-mainboard ZX-6012M-TSL V4.0
I can give you both firmware if you needed.
Thanks!

I have a ZX-6012M but it has 128x128 LCM.

You should post both of the firmwares for inspection.

This is the firmware of the player with a broken display

And this is the firmware of the player - donor.
Firmware is downloaded from the Internet - it is not from the player.

LX2114: Very strange connectivity (RST=A2,A0=C2,BKL=A0), equally strange LCM controller (Samsung-inspired commands?) -- 128x160
ZX-6012M: Common connectivity (shared with at least 5 other models), 132x132 (active area 128x128), standard Epson-compatible controller

My recommendation is to use the ZX-6012M instead, since you can easily find firmware for it and the hardware is well known.

If I understood correctly, recommend changes to the original firmware to another, to meet the new display. If so, can you recommend me a suitable firmware.
Hardware is -
CPU AK1025
Flash Hunix-1GB
with FM TEA5767
Loudspeaker-Yes
Thanks very much!

To lolita:
I found the necessary drivers and they changed in the original firmware. Now the display began to show but "incorrect".
http://img191.imageshack.us/img191/2589/dsc0160712.jpg
http://http://img191.imageshack.us/i...dsc0160712.jpg

Then I changed UI30.RES files from the firmware to 1.5 inches and the player started to show even better, like 1.5 inches, but lost the main menu.

I think the problem is as follows:
Original display of the player was 160/128 pixels
http://img824.imageshack.us/img824/6517/foto201.jpg

http://img824.imageshack.us/img824/6517/foto201.jpg

The new drivers are for 128/160 pixels

If I change something in the drivers - the display from 128/160 to 160/128 pixels I think it will be OK

Please tell me what to change in the drivers to make the drivers for 160/128 pixels