Replacement display MP4

iwanwas · #1 (**permalink**) 11th May 2010, 12:43 pm

Hi, I have MP4 player with a broken display. Can I be replaced by another screen, other than the original? Other displays to work I need to change something in the firmware and what? Thanks!
Sorry about my English

ops:

PS I have the original firmware, if anyone can make changes as needed

lolita · #2 (**permalink**) 12th May 2010, 2:00 am

Part number?

iwanwas · #3 (**permalink**) 12th May 2010, 2:26 am

Broken display
NO128160CNFG1 FP-1
-XL-2006.11

Works display
JCT006A
07.06. 10
Can you help me?

lolita · #4 (**permalink**) 12th May 2010, 10:14 pm

Do they have the same pinout? I'm not familiar with those parts.

iwanwas · #5 (**permalink**) 13th May 2010, 1:55 am

I think that the same pinout, but maybe need to change something in the firmware. And I do not know what and how to change...

lolita · #6 (**permalink**) 14th May 2010, 1:49 am

The display driver.

They may have the same controller, in which case no change is required.

iwanwas · #7 (**permalink**) 14th May 2010, 5:04 am

I swapped the displays and new display shows nothing, just working lights.
I think something should change in the software.
These drivers where to look - in a firmware?
I do not have much experience, so I need more information, explanations and assistance.
Thanks!

lolita · #8 (**permalink**) 15th May 2010, 1:47 am

What model of player?

iwanwas · #9 (**permalink**) 17th May 2010, 1:19 am

The Player is "neo m'sport MP-01F"-Mainboard LX-2114-V1-97
The display is from "IOcean"-mainboard ZX-6012M-TSL V4.0
I can give you both firmware if you needed.
Thanks!

lolita · #10 (**permalink**) 18th May 2010, 1:41 am

I have a ZX-6012M but it has 128x128 LCM.

You should post both of the firmwares for inspection.