Video and audio not together
 

After about 7 mins the audio gets faster then the video. really anoying, im using 3.68 amv converter.

I have the same problem. I'm using 3.74 version. Any help, please ?

Re: VIDEO AND AUdio not together
 

Hello
i answered my own problem
put the quality and medium and the frames at medium and check off try another codec. and it will work

what computer do you have?

I'm using my parents computer, since I'm temporarily at their home and it's not so great equipment - 128 RAM, 1,2 processor. Does it matter?
At home I've got 256 RAM and 1,8 Processor.

But I tried to do what you say, and I've got another problem.
I'm using 3.74 AMV converting tool, which is on my CD with software to the mp4 I've bought.
When I open the AMV converter from the CD I've got option to convert the picture with 160x120 resolution (which works), but I can't change these options you've said (they're both set on high, video mode 2 - and these options cannot be changed).
When I open the AMV converter after installing it on the computer, I can change these options, but I don't have the option to change the resolution to 160x120 - which seems to be the ONLY ONE that works on my mp4layer (I tried other resolutions, and it all ended up with completely blurred picture on my player).
I'm getting frustrated. What can I do?

Re: VIDEO AND AUdio not together
 

HEllo

I just wanted to know you computer to know if thats the problem. becaause i dont know if you know what skype is but i has problem with for examples dell inspirons 1150. so ya never mind.

well If i were you i would download 3.68. it has the most options and is must stable. http://s1mp3.org/en/downloads_tools.php click on the 3.68. ok and what size screen do you have. Because if yours is 1.5 inch then it should be 128 * 94. something like that and the 3.68 has that option and bigger. remember middle quality and middle resolution and try another codec.
bye

zzyzzyxx, For 160x120 you can use version 3.57 setup as descibed in this post:
http://www.mympxplayer.org/full-scre...or--vt449.html
which is the method I use.
You can also use version 4.0.
Version 3.74 is an early version of 4.0 so it should work. Go to the AMV Converter folder and open the AmvTransform.ini in Notepad. Make sure the setting CHIPTYPE=1, if it is set to 0 change it to 1 and save. This should unlock the 1.8 screen settings however you will not beable to cahnge frame rate and quality settings.

Version 3.57:
http://www.mympxplayer.org/amv-conve...63-mb-df1.html

Version 4.0:
http://www.mympxplayer.org/amv-conve...-mb-df118.html